Reasons and solutions for the film blowing machine head not heating

Oct 30, 2024 Leave a message

 

1. Reasons for the film blowing machine head not heating
There may be many reasons for the film blowing machine head not heating, and we will analyze them in detail below.
1. Electric heating element failure. At this time, you need to check whether the electric heating element is normal. If you find that the electric heating element is damaged, you need to replace it with a new electric heating element.
2. Heating system failure. If the heating system fails, you need to check whether the working state of the heating system is normal. If you find that there is a fault, you need to repair or replace the heating system.
3. Thermostat failure. If the thermostat fails, you need to repair or replace the thermostat.
4. Power failure. If the film blowing machine head cannot be heated, you need to check whether the power supply voltage is normal.
2. Solutions for different reasons
1. Electric heating element failure. If the electric heating element is damaged, you need to turn off the power and open the film blowing machine housing panel and the head cover in turn, remove the electric heater and replace it.
2. Heating system failure. If the heating system fails, you need to check whether the contact between the heater and thermistor is good. If not, you need to reinstall or replace the heater.
3. Thermostat failure. If the thermostat fails, you need to replace or repair it, and adjust the temperature control parameters of the thermostat.
4. Power failure. If the power supply voltage is abnormal, you need to check whether the power supply wire is loose, whether the socket is damaged, etc. If there is a problem with the power supply, you need to repair the circuit or replace the power supply.