Paper bag printing press is also a kind of mechanical equipment. No matter what kind of product is used, it should be well maintained so that it can be used normally and will not fail frequently during use. Generally speaking, the staff should check the low-speed running state before use, and record the ammeter reading on the main electric cabinet as a judgment when the machine is restarted. Then look at the reference standard to see if it's in a normal state.
Then clean the ink on the ink roller. At this point, it is necessary to remove all ink rollers on the device. The purpose of this is to avoid damage caused by long-term extrusion deformation of the rubber roller. The staff also needs to check the bearings at both ends of the paper bag printing machine, maintain the rubber rollers with accumulated paste, and wipe the copper rollers with copper water for maintenance. Here, the plate protector on the cross water roller and bucket roller should also be wiped. These are all maintenance work to do. If you don't usually pay attention, it should be on the agenda now. Otherwise, problems will arise frequently.
In the maintenance of the printing machine, in addition to the above places, it is also necessary to apply a layer of lubricating oil after cleaning the ink tank, ink tank key and ink tank roller for maintenance. This is done to prevent rust. In addition, it is necessary to remove the blanket and pad and PS plate in the printing press equipment, and apply a small amount of lubricating oil to the surface of the blanket cylinder, embossing cylinder and pillow for maintenance.
This is also done to prevent rust. Its service life will not be affected until these jobs are completed.
Well, I will share with you the usual maintenance methods of the paper bag printing machine. If you have any questions, you can consult our online customer service or call Qingzhou Monte Machinery Co., Ltd. if you have any questions. We will be happy to serve you by phone.
Hope the above sharing can be helpful to you!
