1. Wear the safety protective clothing stipulated by the workshop before starting production.
2. Clean up the environment around the equipment and do not store any articles irrelevant to production.
3. Clean up sundries inside and outside the work table and equipment, wipe the guide rail of injection seat and part of the tie rod of mould closing with clean cotton yarn.
4. Check whether the control switches, buttons, electrical circuits, operating handles and handwheels of the equipment are damaged or malfunction. Each switch and handle should be
On the break.
5. Check whether the safety protection devices of each part of the equipment are intact and sensitive and reliable. Check whether the test "emergency stop" is effective, reliable and safe
Whether the door sliding is flexible, whether the limit switch can be triggered when switching.
6. The safety protection device on the equipment (such as mechanical lock lever, stop plate, all safety protection switches, etc.) shall not be moved casually, nor shall any modification or reason be allowed
Meaning to render useless.
7. Check whether the screws in the neat parts are tightened or loosened, and report any abnormal or damaged parts to the foreman, who shall deal with them by himself
Or notify the maintenance personnel to deal with it.
8. Check whether there are foreign bodies in the hopper, do not store any objects above the hopper, and cover the hopper well. Prevent dust and sundries from falling into the hopper
