Daily inspection and maintenance of film blowing machine:
1. Check that the temperature control is in good condition and the heating appliances are in good condition. Pay attention to timely adjust the heating temperature of each point within the index range.
2. Check the traction speed and control the film thickness.
3. Observe and adjust the uniformity of film thickness, and the folding diameter meets the standard.
4, check the air storage cylinder pressure, not too high, but there should be spare pressure.
5. Check and control the proportion of raw materials and mix them evenly.
6, check raw materials without impurities, in particular, should be timely use magnets to check iron mixing.
7, check the reducer box and air compressor cylinder lubricating oil lubrication.
8. Check the temperature rise and mechanical transmission of each running motor regularly.
