Let me solve it below
During the work process, the size of the membrane is different. The size of the feeding size is more than 5mm than the pre -adjustment size.
Processing method:
(1) Instead of adjustment of photoelectric eye sensitivity or wrong choice of polarity.
(2) The photoelectric switch should be replaced with a short circuit between the ground leakage or the end of the end.
(3) The feeding speed is lower than the feeding speed, and the compression strips are required to relax, check the performance of the material, and eliminate the failure.
The size of the plastic bag machine during the work process is different. The size of the feeding size is more than 5mm than the pre -adjustment size. Do you know the processing method that does not send the membrane during the work process?
