Plastic film blowing machine is a device that heats and melts plastic particles and then blows them into thin films. There are many types of plastic film blowing machines, including PE, POF, etc. The films produced by film blowing machines are widely used in many fields according to different materials and characteristics. Suitable for various film packaging, plastic bag films, protective films, etc. This type of film has good barrier properties, fresh-keeping, moisture-proof, antifreeze, anti-oxygen and other characteristics, and can be widely used in light and heavy packaging. Barrier performance and oil resistance. Such as various fresh fruits, meat products, pickles, fresh milk, liquid beverages, medical supplies, etc.
The application range of plastic film blowing machines is mainly determined by different materials. For example, the film produced by PP film blowing machine is suitable for various supermarket shopping bags, with relatively high hardness and low requirements for stretching and brightness. The film blown out by high-pressure PE is suitable for various fresh-keeping bags, and the recycled film is suitable for various garbage bags. Plastic film blowing machines are widely used in various industries.
Plastic film blowing machine
Precautions for daily operation of plastic film blowing machine:
1. Develop a good habit of checking whether the automatic temperature control is intact, the heating device is intact, and the heating temperature of each point is adjusted in time within the index range; if there is any abnormality, it needs to be solved in time.
2. Check the traction speed and control the film thickness; ensure that there is no deviation in the production process and improve the quality as much as possible.
3. Observe whether the film thickness is uniform, whether the folding diameter meets the standard, and whether the film width of the plastic film blowing machine is deviated; and make appropriate adjustments.
4. Check and control the pressure of the cylinder. It cannot be too high, but there must be residual pressure.
5. Maintain the raw material ratio, mix evenly, and eliminate the operation of unbalanced ratio; during the production process of the plastic film blowing machine, check and classify the pure raw materials to avoid affecting the uneven quality.
6. Check whether the raw materials have impurities. When metal foreign matter is mixed in, use a magnet to absorb the mixed substance in time. If necessary, stop the work of the plastic film blowing machine for inspection and remove it as soon as possible to avoid damage to the machine and affect the operation.
7. Check the position of the gearbox of the plastic film blowing machine and the lubrication of the air compressor cylinder to ensure sufficient lubricating oil when starting.
8. Regularly check the temperature rise and mechanical transmission of each running motor, and record the data and suggestions. The recorded data can provide help for the operation of the plastic film blowing machine in the future.







