What is the heat sealing temperature of the bag making machine

Jan 03, 2019 Leave a message

Bag-making machine equipment can produce different specifications of bags, these bags are widely used in the food and chemical industry, so the bag-making machine heat sealing temperature

What is the degree? Credit suisse plastic will give you a detailed introduction today.

PVC bag making machine in the bag making process, all need a hot sealing temperature, its role is to make the adhesive film layer heated to a more ideal adhesion

Flow state. In the selection of heat sealing temperature, according to the characteristics of heat sealing material, film thickness, hot sealing hot pressing times, hot sealing area

So let's think about it a little bit. If the number of hot stamping parts agreed to increase, the temperature can be appropriately lowered, if the heat sealing area increased, can be adjusted to high heat sealing temperature

Degrees.

Because PVC plastic is an amorphous polymer, there is no fixed melting point, so there is only one melting temperature range, that is, solid phase and liquid

A region of temperature between phases in which the film enters a molten state when heated to this temperature range. The upper and lower limits of the temperature range

The limit represents the decomposition temperature and viscous flow temperature of PVC respectively. The difference between them is the key to determine the difficulty of heat sealing.

PVC bag-making machine in the bag-making process, the heat sealing strength is affected by the heat sealing temperature, the higher the heat sealing temperature, the heat sealing strength will increase, but At a certain temperature, the heat seal strength will not change. Heat sealing temperature is too high, it will damage the welding heat sealing material, reduce the heat of sealing

Sealing strength and impact resistance of bags. Therefore, the heat sealing temperature should be higher than the melting temperature of the heat sealing material, and the temperature should not be too high.