The film blower is very widely used in packaging, which can produce various packaging bags, providing people with many conveniences. So what unique advantages it has? , Cost -effective. Therefore, in the production of film blowers, do these details to ensure their good performance. Cold resistance and low temperature. The electro -halo treatment machine's guide roller must not turn on the electromotive treatment machine without a thin film. Once the film is disconnected or stopped, the electric halo processor should be turned off urgently to avoid burning the electric halo treatment machine. The tension is not the film. Regular dust removal should be kept to keep the whole machine clean. Avoid dried operation damage machines and emit noise. The wind rings should be adjusted and cleaned to make the air out of the air. Because the flow rate of air in the membrane bubble is relatively low and irregular, external cooling is more advantageous. The share of packaging and packaging products in the market is increasing, especially composite soft packaging, which has been widely used in food, medicine, chemical industry and other categories. Among them, food packaging is large. Food packaging, cooking food packaging, fast -food food packaging, etc. These products have brought great convenience to people's survival.
High and low pressure dual rotation film blower
High and low pressure film machine is an important machine for production bags. It is well used in many industries. So what factors will affect the temperature of the production of high and low pressure film machines in the actual production process? Let's take a look at it together to understand Bar. Several common film blowing from the film blower: two -way stretch polypropylene film BOPP bidirectional stretching polypropylene film is made after the polypropylene particles are squeezed through the co -squeezed sheet, and then the stretch of two biased stretching Essence When not in use, unplug the power and cover it with a cover. When operating the film blower, the operator cannot stand in front of it, so as not to hurt the operator when an accident occurs. The core rod is deformed medium. The rear template is width or the template is not the film, causing the front template to be inaccurate. The external cooling method is an early application method. Under the action of the cooling ring, the cooling air around the circular ring on the circular ring on the circular ring along the squeezing direction and the outer surface of the membrane bubbles is generated. No electric halo







